Assembly Instructions - Razor Pro Series Owner's Manual

ASSEMBLY INSTRUCTIONS

Attaching the T-bar
Double Triple
1
Loosen the collar clamp and slide it upward, Insert T-bar into the fork until it bottoms out on the headset locknut.
Note: if necessary, carefully twist the T-bar clock-wise while pushing downward until T-bar bottoms out on the
headset locknut.
Double
2
With the front wheel pointed straight ahead, the handlebars square to the front wheel and the Razor logo facing the
front (see page 5), tighten the clamp as shown. Alternately tighten each bolt until the clamp is tightened securely.
Need Help? Visit our web site for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service
contact information is listed at the back of this manual.
Quad
Triple Quad
Pytel
A
B
Pytel
3
WARNING: Failure to
properly install and tighten the
collar clamp may cause the rider
to lose control and fall. If you do
not understand these instructions,
please contact Razor customer care
for assistance.