Assembly Instructions; Need Help? Visit Our Website For Replacement Parts, Product Support And A List Of Authorized Service Centers; At Www.razor.com Or Call Toll Free 866-467-2967 Monday - Friday 8Am - 5Pm Pacific Time. Please Have The - Razor Pro Series Owenrs Manual

ASSEMBLY INSTRUCTIONS

q Collar Clamp
Double Triple
1
Using a 5 mm Allen wrench loosen the collar clamp and slide it upward. With a clock-wise twisting motion, push and
"thread" the T-bar onto the fork until it bottoms out on the fork headset lock nut.
Double
2
With the front wheel pointed straight ahead, the handlebars square to the front wheel and the Razor logo facing the
front, securely tighten each bolt on the clamp collar using a 5 mm Allen wrench (See Page 4).

Need Help? Visit our website for replacement parts, product support and a list of authorized service centers

at www.razor.com or call toll free 866-467-2967 Monday - Friday 8AM - 5PM Pacific Time. Please have the

product I.D. code (located on the bottom of the deck) available for better assistance.
Quad
Triple Quad
3
WARNING: Failure to
properly install and tighten the
collar clamp may cause the rider
to lose control and fall. If you do
not understand these instructions,
please contact Razor customer care
for assistance.