Advertisement
BEFORE YOU BEGIN
occurred during shipping. Because your scooter was partially assembled and packed at the factory, there should not be
Grip
T-tube/ Steering column
Collar clamp
Fork headset locknut
Front fork
Wheels and
wheel bearings
❑ Required Tools
5mm
Allen wrench
ASSEMBLY INSTRUCTIONS
1
Loosen the collar clamp and
slide it upward. With a clock-wise
twisting motion, push and "thread"
the T-tube onto the fork until it
bottoms out on the fork headset
lock nut.
Need Help? Visit our web site for replacement parts, product support and a list of authorized service
centers at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00 AM - 5:00 PM Pacific
Time.
Handlebar
Rigid down tube
Rear fender/brake
Deck
2
With the front wheel pointed
straight ahead, the handlebars
square to the front wheel and the
Razor Logo facing the front, tighten
the clamp as shown. Tighten
securely.
2
WARNING: DO
NOT USE NON-RAZOR
PRODUCTS WITH YOUR
SCOOTER.
Razor scooters have been built to
The original equipment supplied at
the time of sale was selected on
the basis of its compatibility with
the frame, fork and all other parts.
Certain aftermarket products may
or may not be compatible.
WARNING: Failure to
properly install and tighten the
collar clamp may cause the rider to
lose control and fall. If you do not
understand these instructions or
the concept of "tighten securely"
mechanic.
Advertisement
