Service Overview; Board Location; Removal And Installation Of Cabinet; Front Cover - Sony SNC-RZ30N Service Manual

1-1. Board Location

MC-141 board
SE-656 board
SY-303 board

1-2. Removal and Installation of Cabinet

1-2-1. Front Cover

1. Remove the two hooks while pushing the front cover
in the direction indicated by the arrow A, then remove
the front cover in the direction indicated by the arrow
B.
Front cover
A
B
A
Hooks
2. Attach the front cover in the reverse order of step 1.
SNC-RZ30N/RZ30P (E)
Section 1

Service Overview

VC-292 board
CD-400 board
MDR-20 board
MDR-19 board

1-2-2. Upper Cover and Lower Cover

1. Remove the front cover. (Refer to Section 1-2-1)
2. Remove one screw from the upper cover, then remove
the upper cover in the direction indicated by the arrow
A.
3. Remove the two screws from the lower cover, then
remove the lower cover in the direction indicated by
the arrow B.
Upper cover
M 2x4
A
Projections
Camera block
4. Attach the upper cover and lower cover in the reverse
order of steps 1 to 3.
n
When attaching the lower cover, be sure to align the
projections of the camera block with the holes of the lower
cover.
Upper
cover
Lower
cover
M 2x4
B
M 2x4
Holes
Lower cover
1-1