Programming - Husqvarna Viking Platinum 755 User Manual

Programming

Platinum 715/735
You can program stitches into combinations. The
program is automatically saved in the machine
memory and is retained even when the machine is
turned off.
Platinum 755
You can program stitches and letters into combina-
tions. Save the programmed combinations in the
permanent memories. A programmed stitch combi-
nation that is saved is retained in the memory even
when the machine is turned off.
PROG mode
When programming, the Sewing Advisor
on Platinum 715/735 is not active. Touch
to activate the
FUNC
Memories
(Platinum 755)
Touch to select memory. The M and the
M
number that follows indicates the active
memory. There are two different memories
(M1 and M2). Each memory holds up to 30
stitches, which means that you can program
and save up to 60 stitches and/or letters.
When activating
PROG
previously used is active. To save your
programmed combination in the other
memory, select it by touching
gramming new stitches.
Move between programmed stitches
Use the arrow buttons to move between
the stitches to check what has been pro-
grammed. On the InfoDisplay you see the
number of the selected stitch in the pro-
gramming sequence.
To sew the stitch program touch
button to activate the
mode.
PROG
, the memory
before pro-
M
FUNC
mode.
REP
Functions and InfoDisplay
Note
(Platinum 755)
can decrease the space between letters. Touch
when the numbers/special characters menu
is active, to program short reverse stitches. The
more reverse stitches you program the shorter the
distance to the next entered letter.
: When programming, you
29