Husqvarna Viking Platinum 755 User Manual page 47

The buttonhole size needed will vary with
the thickness and style of your button.
Always stitch a sample buttonhole on
scraps rst.
Sew the Buttonhole:
• Fold fabric in two and place stabilizer in
between.
• Mark the buttonhole location on your
fabric.
• Place the fabric under the Sensor Button-
hole Foot. The measurement wheel can
be raised to a stop, which makes it easier
to place the fabric under the presser foot.
Use the markings on the left toe of the
Sensor Buttonhole Foot to position the
garment edge. Align the edge of the
garment with the middle mark to have
5/8'' (15 mm) from the edge to the but-
tonhole.
• Lower the Sensor Buttonhole Foot and
step on the foot control. A straight stitch
is sewn backwards, indicating the left but-
tonhole column, then the satin column is
sewn forwards. This is repeated for the
right column. The bartacks are automatic
(see illustration 1). Your sewing machine
stops when the buttonhole is completed.
Note: When sewing buttonholes without
satin stitches or when using Buttonhole
Foot C, the sewing steps are different (there
is no straight stitch step). (See illustration 2)
d
1. Sewing direction for satin stitch buttonholes sewn
with the Sensor Buttonhole Foot
2. Sewing direction for buttonholes without satin
stitches or satin stitch buttonholes sewn with But-
tonhole Foot C
Sewing
The markings on the left toe
gives a 5/8'' (15 mm) but-
toning edge
45