Table of Contents
Advertisement
• Stitch a buttonhole. Do not hold back
the cord. The satin buttonhole columns
will stitch over the cord.
• Stop sewing with the needle down before
the last bartack end of the buttonhole is
sewn and lift the cord off the nger and
pull out the slack.
• Cross the cord in front of the needle and
stitch the last bartack end of the button-
hole over the cord.
• Thread the cord ends into a large sewing
needle, pull to the wrong side and knot
the ends before cutting excess cord.
Cutting Buttonholes
Cut the buttonhole open with the seam
ripper. Start from any side cutting towards
the center of the buttonhole, then proceed
from the other side - again cutting towards
the center. This way you avoid damaging
the bartacks.
Button
Sew buttons, snaps, hook and eyes quickly
with your Platinum.
Fabric: Woven medium
715 / 735
755
1:05
1:28
Snap off the presser foot and lower the
feed teeth by turning the dial on the free
arm to
.
Use the clearance plate to create a thread
shank.
Sewing
47
Hide quick links:
Advertisement
Table of Contents
