Husqvarna Viking Platinum 755 User Manual page 55

Bobbin Thread Breaks?
• Wind a new bobbin.
• Replace the bobbin in the machine, check
correct threading, page 10.
• If stitch plate hole is damaged - replace
stitch plate.
• Clean bobbin area.
Bobbin Winds Irregularly?
• Check threading for bobbin winding.
Wrong Stitch, Irregular
or Narrow Stitches?
• Turn machine off and on to reset.
• Change needle, rethread top and bobbin
threads.
• Use stabilizer.
Machine Sews Slowly?
• Check speed.
• Remove stitch plate and brush lint from
bobbin and teeth area.
• Have the sewing machine serviced at
your dealer.
Machine Will Not Sew?
• Put bobbin winder spindle up into
sewing position.
• Check plugs are all the way into machine.
• Check wall plug and power to wall plug.
• Have the sewing machine serviced.
Unbalanced Buttonholes?
If neccessary, for speciality fabrics, you
have the possibility to adjust the buttonhole
balance. To balance the stitch density of the
right buttonhole column, touch both arrow
buttons at the same time until the balance
icon is visble on the InfoDisplay.
Use the stitch length buttons to adjust the
balance. (-) will make the stitches in the
right column closer together (more dense).
(+) will make the stitches further apart (less
dense).
By touching the
CLR
returns to stitch length/button size mode.
The balance setting will remain until your
sewing machine is turned off.
Note: Only the right side stitch column will be
adjusted. Balance it to the left stitch column.
Have your sewing machine Serviced
Regularly by your Husqvarna Viking
Dealer!
If you have followed this trouble shoot-
ing information and still are having sewing
problems, take the sewing machine to your
dealer. If there is a speci c problem, it is a
great help to test sew with your thread on a
scrap of your sewing fabric and bring it to
your dealer. A sewing sample will often give
much better information than words.
Non-Original Parts and Accessories
The sewing machine warranty does not
cover any defect or damage caused by use
of non-original accessories or parts.
Care of your Platinum
button the machine
53