To Start And Exit The Customer Support Tool - Sharp XE-A207 Instruction Manual

To start Customer Support Tool
How to install the Customer Support Tool
To start Customer Support Tool
1. Download the Customer Support Tool from the web site www.sharpusa.com/registersoftware.
2. Unzip (extract / decompress) the contents of the .ZIP file to a directory where you will use the program.
The Customer Support Tool software is provided in a .ZIP format and you may need a separate
Note
program to extract (unzip) the file.

To Start and Exit the Customer Support Tool

To start the Customer Support Tool
1. Double-click “"PC-LINK_A207U(.exe)”" in the A207 folder, which has been
created after unzip (extract / decompression).
The main window of the Customer Support Tool appears.
Note The [DEPT] tab is selected immediately after starting Customer
Support Tool.
Notice
You cannot start the Customer Support Tool if it is already running.
To exit the
1. Click [File], and then [Exit].
Data you have edited is saved in the data folder, and the main window is
closed.
You can also finish by clicking [X] at the upper right corner of the main
window.
4
1
1