Lincoln Electric POWER FEED 10M SINGLE/DUAL SVM172-A Service Manual page 93

CC-3
FIELD INSTALLED
OPTIONS/ACCESSORIES
• OPTIONAL CONTROL PANEL KITS
• Arclink Cables
- Without Weld Cable
Cable Lengths: 8 ft
• Co-Axial Power Cable
Cable Length:25 ft. (350 amps)
50 ft. (350 amps)
75 ft. (325 amps)
100 ft. (325 amps)
• Weld Power Cables
- Lug to Lug - 3/0, 600A, 60% Duty Cycle, 10 ft
- Lug to Lug - 3/0, 600A, 60% Duty Cycle, 35 ft
- Lug to Lug - 3/0, 600A, 60% Duty Cycle, 60 ft
- Lug to Lug - 3/0, 600A, 60% Duty Cycle, 110 ft
• Feed Plate Gun Receiver Bushings. For use with:
- Lincoln Gun Connector
- Innershield/SubArc Guns
- Tweco® 4 Gun Connector
- Magnum 200/300/400 Guns
- Tweco® 5 Gun Connector
- Magnum 550 Guns
- Miller® Adapted Gun (K466-3)
- OXO® Gun
- Fast Mate Guns
- Magnum 200/300/400 to K1500-2 Adapter K466-2
- K613-7 Magnum 550 to K1500-3 Adapter
• Incoming Bushings
- Lincoln Conduit .025-1/16"
- Lincoln Conduit 1/16-1/8"
• Wire Straightener
- For 10-Series Feed Heads
or Separate Mounting
• Spindle Adapters
- For Mounting Readi-Reels and
2" I.D. Spools up to 60 lbs.
- For Mounting Readi-Reels and
2" I.D. Spools up to 60 lbs.
- For 14 lb. Innershield Coils to be
mounted on 2" O.D. Spools
- For 8" O.D. Small spools (10-12.5 lbs.)
to be mounted on 2" O.D. spindles
ACCESSORIES
K1543-8
16 ft K1543-16
25 ft K1543-25
50 ft K1543-50
100 ft K1543-100
K1796-25
K1796-50
K1796-75
K1796-100
K1842-1
K1842-35
K1842-60
K1842-110
(K466-1)
K1500-1
(K466-2, K466-10)
K1500-2
(K1637-7)
K1500-3
K1500-4
K1500-5
K489-7
K613-7
K1546-1
K1546-2
K1733-1
K162-1
K162-1H
K435
K468
POWER FEED 10M SINGLE/DUAL
• Readi-Reel Adapters
- Adapts 22-30 lb. Readi-Reels
to a 2" Spindle
- Adapts 50-60 lb. Readi-Reels
to a 2" Spindle
• Coil Adapter
- Adapts 50-60 lb. Lincoln coils
to a 2" Spindle
• Plastic Wire Cover for
30-44 lb. Wire Packages
• Plastic Wire Cover for up
to 60 lb. Wire Packages
• Water Connection Kit
• Water Connection Adapter
• Magnum Flow Sensor
• Gas Guard Regulator
• Dual Procedure Switch (5 pin)
with Trigger Leads
• Large Panel Security Door
• Swivel Platform
• Light Duty Caster Kit
• Insulated Lift Bail
K162-1 - WIRE SPINDLE ADAPTER
Spindle for boom mounting Readi-Reels and 2" (51
mm) I.D. spools with up to 60 lb. (27.2 kg) capacity.
User mounted to appropriately prepared boom frame-
work. Includes an easily adjustable friction brake for
control of overrun (a 2" spindle is standard on Power
Feed 10 Dual Bench model).
When a 2" (51 mm) spindle is used with Readi-Reels,
or coils not on 12" (305 mm) or 8" (203 mm) O.D.
spools, an adapter is required:
K1504-1 - COIL ADAPTER
Permits 50 lb to 60 lb (22.7-27.2 Kg.) coils to be
mounted on 2" (51 mm) O.D. spindles.
CC-3
K363P
K438
K1504-1
K1634-1
K1634-2
K590-6
KP1529-1
K1536-1
K659-1
K683-3
K1574-1
K1557-1
K1556-1
K1555-1