Picture 3/3 Screen; Matrix 1/5 Screen - Panasonic AW-HE130KP Operating Instructions Manual

Camera menu items (continued)

Picture 3/3 screen

P ict u r e 3 / 3
Knee Mod e
Knee Po i n t
Knee Sl o p e
White Cl i p
Whit e C l i p L e v e l
DNR
Retur n
Knee Mode [Off, Auto, Manual]
Set the operating mode for gradation compression (knee).
Off Turn the knee function off.
Auto Enable the knee function, and set the knee point and knee
slope automatically.
Manual Enable the knee function, and set the knee point and knee
slope manually.
Knee Point [70.0% to 107.0%]
Set the compression level (knee point) position for high-brightness
video signals.
This is only enabled when [Knee Mode] is set to [Manual].
Knee Slope [0 to 99]
Set the knee slope.
This is only enabled when [Knee Mode] is set to [Manual].
<NOTE>
• When [DRS] is enabled, the knee setting is disabled.
White Clip [Off, On]
Turn the white clip function off/on.
White Clip Level [90% to 109%]
Set the white clip level.
This is only enabled when [White Clip] is set to [On].
<NOTE>
• When [Knee Mode] is set to [Auto] and the white clip value is
changed, the knee value will also change.
DNR [Off, Low, High]
Set the digital noise reduction level for outputting bright, clear images
without noise, even at night and low-light conditions.
When [Low] or [High] is selected, noise can be eliminated.
However, image lag may increase.
Return
Return to the previous menu level.
50

Matrix 1/5 screen

A u t o
9 3 . 0 %
8 5
O n
1 0 9 %
O f f
Matrix Type [Normal, EBU, NTSC, User]
Return
M a t r i x 1 / 5
M a t r i x T y p e
R e t u r n
Select the type of color matrix.
Normal
This item is used to load the preset color matrix data
EBU
and compensate for the saturation and color phase.
NTSC
User On the [Matrix 2/5 screen], the [Linear Matrix] value
can be adjusted by the user.
On the [Matrix 3/5 screen], [Matrix 4/5 screen] or
[Matrix 5/5 screen], the [Color Correction] value can
be adjusted by the user.
Return to the previous menu level.
N o r m a l