Panasonic AW-HE130KP Operating Instructions Manual page 83

Web screen configurations (continued)
Limitation Setting
This establishes the up, down, left and right limit settings of the pan-
tilt head.
First, move the pan-tilt head to the position where the limit is to be
set, and press the corresponding button below to set the direction (up,
down, left or right) in which the limit is to be set.
After each setting has been selected, press the Set button to enter
the setting.
Use this to save the current position as the upward
Tilt Up
limit.
Use this to save the current position as the downward
Tilt Down
limit.
Use this to save the current position as the leftward
Pan Left
limit.
Use this to save the current position as the rightward
Pan Right
limit.
Use this to enable or disable the limit setting in each
Set/Release
direction.
System screen [System]
„
This menu has items that relate to the genlock phase adjustment and
camera's output image settings.
z Genlock
This item's setting is reflected immediately.
Horizontal Phase
This is used to adjust the horizontal phase during genlock.
Setting range: -206 to +49
Factory settings: 0
<NOTE>
• The horizontal phases of the HD and SD signals cannot be adjusted
separately.
Neither is it possible to adjust the chroma phase of the VIDEO OUT
signals. The free run setting is used.
83