Replacement Magnum 250L Gun And Cable Assembly; K607-1 Spool Gun Adapter Kit; Installing The K607-1 Spool Adapter Kit - Lincoln Electric WIRE-MATIC SVM 117-A Service Manual

C-1
OPTIONS/ACCESSORIES
REPLACEMENT MAGNUM 250L
GUN AND CABLE ASSEMBLY
The following GMAW gun and cable assemblies are
available for use with the WIRE-MATIC 250. Each is
rated 200 amps 60% duty cycle or 250 amps 35% duty
cycle. The gun and cable assemblies are equipped
with the integrated connector, twist-lock trigger con-
nector, and includes a liner, diffuser, and contact tips
for the wire sizes specified:
LENGTH PART NO.
10' (3.0 m) K533-1
12' (3.6 m) K533-2*
15' (4.5 m) K533-3
10' (3.0 m) K533-4
12' (3.6 m) K533-5
15' (4.5 m) K533-6
* Included with the K578-1.

K607-1 SPOOL GUN ADAPTER KIT

The K607-1 Spool Gun Adapter Kit provides "up front"
direct connection of the K487 Spool Gun (with remote
speed control) or the K469 Spool Gun (requiring K518
Connection Adapter) for use with the WIRE-MATIC
250.
It also provides single switch transfer between the
machine's feeder gun or the spool gun for same polar-
ity welding with different wire and gas processes.
The kit includes a spool gun module board and a con-
nection box assembly with connecting plug and lead
harnesses, mounting hardware, installation instruc-
tions, and operating instructions.
INSTALLING THE K607-1 SPOOL
GUN ADAPTER KIT
The spool gun module mounts inside the control sec-
tion of the machine. It provides control and inter-con-
nection between the machine's control board and the
spool gun kit connection box.
The connection box mounts to the front of the
machine's base. It provides for inlet connection of the
ACCESSORIES
spool gun gas supply hose, as well as up-front easy
connection of the spool gun gas line, control plug, and
electrode lead (using the Twist-Mate plug provided with
the kit). An Installation and Operation Manual is includ-
ed with the kit.
WIRE SIZE
.035-.045"
(0.9-1.2mm)
.025-.030"
(0.6-0.8mm)
WIRE-MATIC 250
C-1