Confirmation Of Firmware Version And Checksum - Yamaha RX-V1800 Service Manual

RX-V1800/HTR-6190/DSP-AX1800
5. Press the "POWER ON/OFF" key of DVD/CD player
to turn on the power.
6. Press the "EJECT" key of the DVD/CD player to open
the tray.
7. Put the firmware CD on the tray and close the tray.
8. Press the "PLAY" key of the DVD/CD player.
Then writing of the firmware is started. (Fig. 3)
9. When writing of the firmware is completed, <Up-
date Success Please MASTER Off!> is displayed.
(Fig. 3)
* If <Update Success Please MASTER Off!> is
not displayed or <Error xxx> appears before
coming to the end, perform steps 1 to 8 of "Op-
eration Procedures" again.
Writing is started. /
Found Header
10. Press the "STOP" key of the DVD/CD player.
11. Press the "EJECT" key of the DVD/CD player to
open the tray.
12. Remove the firmware CD from the tray and close
the tray.
13. Turn off the power of the DVD/CD player and dis-
connect the power cord from the AC outlet.
14. Press the "MASTER ON/OFF" key of the main unit
to turn off the power.
15. Disconnect the power cable of the main unit from
the AC outlet.
G Confirmation of firmware version and checksum
Confirm the firmware is updated successfully with the
self-diagnostic function.
For more information, refer to "SELF-DIAGNOSTIC
FUNCTION".
• Version of MAIN
• Checksum of MAIN
• Version of VIDEO
• Checksum of VIDEO
• Version of DSP1 (TI-1)
• Checksum of DSP1 (TI-1) (Menu no. 29-7)
• Version of DSP2 (TI-2)
* When the displayed firmware version and checksum
are different from written firmware version and
checksum, follow the steps from 1 to 15 of "Opera-
tion Procedures" again.
22
Fig. 3
(Menu no. 29-1)
(Menu no. 29-2)
(Menu no. 29-3)
(Menu no. 29-4 and 29-5)
(Menu no. 29-6)
(Menu no. 29-11)
Writing is completed. /
Update Success
Please MASTER Off!