Writing To Dsp - Yamaha RX-V1800 Service Manual

RX-V1800/HTR-6190/DSP-AX1800
•

Writing to DSP

1. Start up "DSP_FLASHER_Vx800_v1.0.exe" of
the PC. (Fig. 13)
2. Select "DSP". (Fig. 11)
3. Select the RS232C port (COMx) being set on
the PC side and press the [connect] button, and
<connected> appears as [Com Port Status].
(Fig. 12)
* If <connected> does not appear as [Com
Port status], check the setting on the PC
side again if the RS232C port (COMx) is se-
lected properly.
4. Press the [open] button and select "Vx800a_data
1_.verxxxxx.hex". (Fig. 12)
* Select "Vx800a_data 1_.verxxxxx.hex" also
for HTR-6190.
28
Fig. 11