Brush Removal And Replacement - Lincoln Electric RANGER 9 SVM 110-A Service Manual

F-46
Service and repair should be performed by only Lincoln Electric factory trained person-
nel. Unauthorized repairs performed on this equipment may result in danger to the tech-
nician or machine operator and will invalidate your factory warranty. For your safety and
to avoid electrical shock, please observe all safety notes and precautions detailed
throughout this manual.
If for any reason you do not understand the test procedures or are unable to perform the
test/repairs safely, contact the Lincoln Electric Service Department for electrical trou-
bleshooting assistance before you proceed.
(WELD).
DESCRIPTION
The following procedure will aid the technician in accessing the generator brushes for
maintenance or replacement.
MATERIALS NEEDED
5/16" Nut driver
5/16" Open end wrench
3/8" Wrench
7/16" Wrench
Slot head screw driver
Needle nose pliers
RANGER 9
TROUBLESHOOTING & REPAIR

BRUSH REMOVAL AND REPLACEMENT

WARNING
Call 216-383-2531 or 1-800-833-9353
F-46
RANGER 9