Raymarine mn100 User Manual page 23

SETUP UNITS - Units Chapter
In each case press the
to change units and press the
chosen units. Default values are indicated in bold.
S6 Speed
S7 Depth
S8 Wind
S9 Distance
S10 Temperature
www.raymarine.com
The units in which ALL speed related information is
displayed.
The options available are: KNOTS, KPH (Kilometres per
hour) or MPH (Statute Miles per hour).
The units in which ALL depth related information is
displayed.
The options available are: FEET, METRES or FATHOMS.
The units in which ALL wind speed related information is
displayed.
The options available are: KNOTS or M/S (Metres per
second).
Sets the units in which ALL Distance related information is
displayed.
The options available are: NM (Nautical Miles), KM
(Kilometres) or SM (Statute Miles).
Sets the units in which water temperature information is
displayed.
The options available are: o C (Degrees Celsius) or
(Degrees Fahrenheit).
button quickly to edit, press the
button quickly to select the
Set-up and Calibration
or
o F
21