Table of Contents
Advertisement
SETUP COMPASS - Compass Chapter
S25
Heading Response
S26
Heading Format
S27
Compass Heading Calibration
S28
Magnetic Variation
S29
Magnetic Deviation
been completed the deviation correction value will be displayed.
See page 32 section 4.4 for the calibration process.
www.raymarine.com
Sets the update period of the compass display.
Auto/Slow/Medium/Fast
Tells the system to show heading information in either
Magnetic or True format.
Aligns the displayed heading with the actual magnetic
heading of the boat.
See page 32 section 4.4 for the calibration process.
Allows manual entry of local magnetic variation. This setting
is ignored if variation information is available from a GPS
source.
However carefully positioned the Compass Transducer is
there is always the likelihood of errors being introduced by
the vessel and equipment. To remove errors it is necessary
to "Swing" the compass by turning the boat slowly until the
system can optimize the readings. Once the correction has
Set-up and Calibration
25
Hide quick links:
Advertisement
Table of Contents
