Raymarine mn100 User Manual page 18

mn100 Digital Display
Environment Chapter
28 Sea Temperature
29 Race Timer
The display will sound a single beep every 60 seconds until 1 minute
remains when a beep will sound at 10 second intervals. The final 10
seconds will count down with a beep each second with "START" being
indicated by a triple quick beep at 0. The timer will automatically start to
count the elapsed time and this will continue until the
pressed and held for 2 seconds.
At any time during the countdown a quick press of the
resynchronise the timer to the nearest minute and commence countdown
from that point.
Press and hold for
1 second to enter
the timer setup
16
Current sea temperature as measured by the sensor in the
Speed Transducer.
Displayed in the current temperature units.
See p 21 s10 to select units
Countdown or elapsed time stopwatch.
Press and hold the
Use the
countdown time in minutes.
Press the
countdown.
Press the button quickly to start the countdown.
Select the desired
countdown time
button for 1 second.
and buttons to set the required
button quickly to prepare to start the
button is
button will
Press and hold for
1 second to store
the countdown
time
www.raymarine.com