Calibration - Raymarine mn100 User Manual

S15 Waypoint Arrival Alarm
3.5 Calibration Page Description
In each case press the
to change units and press the
chosen units. Default values are indicated in bold.
SETUP SPEED - Speed Chapter
S16 Speed Response
S17 Speed Calibration
S18 Speed Display Format
S19 Sea Temperature calibration
www.raymarine.com
Sets the display to alarm if a Waypoint Arrival Alarm is issued
by the GPS.
The options are: On/Off.
Sets the update period of the Speed display.
The options are: Auto/Slow/Medium/Fast
The boat speed calibration factor adds a percentage factor
which corrects the information from the paddlewheel and
ensures the boat speed is displayed correctly.
See page 30 section 4.2 for the calibration procedure.
Sets the number of decimal places to which the boat speed
information is displayed.
Applies to the units selected on page 21 s6.
The options are 0.1 or 0.01.
The sea temperature calibration factor adds a value which
corrects the information from the temperature sensor and
ensures the water temperature is displayed correctly.
button quickly to edit, press the
button quickly to select the
Set-up and Calibration
or
23