Hitachi RPI-0.8FSG1 Service Manual page 346

OPTIONAL FUNCTION
(4.4 Remote Control Switch)
Hi Speed at Heating
15 C6
Thermo-OFF
Canceling of
Enforced 3 Minutes
16 C7
Minimum Operation Time
of Compressor
Thermistor of
17 C8
Remote Control Switch
18 C9
Not Prepared
19 CA
Not Prepared
Selection of
20 Cb
Forced Stoppage Logic
21 CC
Not Prepared
22 d1 Power Supply ON/OFF 1
23 d2
Not Prepared
24 d3 Power Supply ON/OFF 2
25 E1 Ventilation Mode
26 E2 Increasing Supply Air Volume
27 E3
Not Prepared
28 E4 Precooling/Preheating Period
29 E5
Not Prepared
Automatic Setting for
30 F1
OFF Timer
Remote Control
31 F2
Main-Sub Setting
NOTES:
1. (*1): This function is applicable for RCI and RCD models. In case of RPI-0.8 to 5.0FSG1 series,
"Hi Speed 1" is "High External Pressure Setting" and "Hi Speed 2" is "Low External Pressure Setting".
2. As for the optional functions with " X " at the individual setting, only when the "All Rooms" is selected to set
the optional function, the setting condition can be changed.
3. The items "C1" and "C3" are not available. Do not change the setting condition "00".
4. For the models RPF(I)-FSG(E), RPI-8, 10HP, RPC-FSG1 (Before Alternation) and RPK-FSGM (Before
Alternation), only the function setting of No.1 to No.9, No.17 and No.30 are available.
(No.17 is settable "01" only.)
4-42
00 Not Available
01 Available
00 Not Available
01 Available
00 Control by Indoor Suction Thermistor
01 Control by Thermistor of Remote Control Switch
02 Control by Average Value of Indoor Suction
Thermistor and Thermistor of Remote Control
Switch
−
−
00 Forced Stoppage Input

01 Forced Stoppage Input
−
00 Not Available
01 Available
−
00 Not Available
01 Available
00 Automatic Ventilation
01 Ventilation by Total Heat Exchanger
02 Bypass Ventilation (No Total Heat Exchanging)
00 Not Available
01 Available
−
00 Standard
01 30 minutes
02 60 minutes
−
00 No Function
01 OFF Timer by 1 hour
02 OFF Timer by 2 hours

M
23 OFF Timer by 23 hours
24 OFF Timer by 24 hours
00 Main

01 Sub
A Contact
B Contact