Hitachi RPI-0.8FSG1 Service Manual page 345

The setting condition of the optional function item is indicated at the segments for timer setting
3
time indication. Refer to the table in the next pages and description of each items for the
indication of the setting condition and the contents of the optional function.
(b) Press the "TIME
shown below.
b1 b2 b3 b4
(c) Press the "CHECK" switch, and the setting condition of the optional function is changed as shown
below.
(5) Selection of Other Indoor Unit
At the optional setting mode, press the "TEMP
the remote control switch is changed so that the indoor unit can be selected to set the optional
function described in the item (3).
(6) Return from Optional Function Setting Mode
Press the "RESET" switch, the optional function setting is memorized and the mode is returned to the
normal condition.
G Setting Items of Optional Functions
No. Items Optional Functions
Removal of Heating
1 b1
Temperature Compensation
due to Uneven Heat Load
Circulator Function at
2 b2
Heating Thermo-OFF
Enforced 3 Minutes
3 b3
Minimum Operation Time of
Compressor
Change of Filter Cleaning
4 b4
Time
5 b5 Fixing of Operation Mode
6 b6 Fixing of Setting Temperature
Fixing of Operation as
7 b7
Exclusive Cooling Unit
8 b8 Automatic COOL/HEAT
9 b9 Fixing of Air Volume
10 C1
Not Prepared
11 C2
Not Prepared
12 C3
Not Prepared
13 C4 Drain Pump in Heating
14 C5 Hi Speed
" switch or the "TIME
~ E4 E5 F1
00 01 ~
Individual
Setting





−
−
−
" switch, the optional function item is changed as
When pressing the "TIME
When pressing the "TIME
When pressing the "CHECK" switch
" switch or the "TEMP
Setting
Condition
00 Not Available
01 Available
00 Not Available
01 Available
00 Not Available
01 Available
00 Standard
01 100 hours
02 1,200 hours
03 2,500 hours
04 No Indication
00 Not Available
01 Available
00 Not Available
01 Available
00 Not Available
01 Available
00 Not Available
01 Available
00 Not Available
01 Available
00 Not Available
01 Available
00 Not Available
01 Hi Speed 1 (*1)
02 Hi Speed 2 (*1)
OPTIONAL FUNCTION
(4.4 Remote Control Switch)
" switch
" switch
" switch, the condition of
Contents
4-41