Hitachi RPI-0.8FSG1 Service Manual page 218

SERVICING
(2.5 2-Way Cassette Type)
(4) Remove two (2) screws fixing the motor assembly and remove two (2) stoppers by lifting the motor
assembly upwards (to the arrow direction) by hand.
The stopper can be removed by pulling. The motor assembly can be removed by removing the
connector at the same time.
(5) Remove one (1) screw fixing the crank and cut the plastic tie fixing the motor cord.
Remove the motor after removing two fixing screws.
Motor Assembly
2-78
TURN OFF all power source switches.
Screws
Motor Assembly
Motor
Tool
Connector
Stopper
Tool
Plastic Tie
Screw
Screws
Crank
Phillips Screwdriver
Phillips Screwdriver
Motor