Table of Contents
Advertisement
C-2
INPUT CABLE ASSEMBLIES:
K1797-25
Consists of a 14-conductor control cable extension 25ʼ
in length.
K1797-50
Consists of a 14-conductor control cable extension 50ʼ
in length.
Note: Extensions can only be connected up to 100ʼ Maximum
length.
K1520-1 115V/42V TRANSFORMER KIT
Required to use LN-10 with Lincoln Power Sources
without 42VAC auxiliary and a 14-pin connector recep-
tacle. These power sources include the DC-250, DC-
600 (Below Code 10500), DC-1000 and Pulse Power
500. Also can be used with older DC-400 models.
K590-4 WATER CONNECTION KIT
Includes water cooled gun tube fittings and self-sealing
outlet and inlet quick-connectors for mounting into the
DH wire drive connection box.
K659-1 GAS GUARD REGULATOR
Adjustable flow regulator with removable adjustor key
for CO2 and Argon blend gases. Mounts onto wire drive
gas inlet, and reduces gas waste and arc start "blow" by
reducing surge caused by excess pressure in supply
hose.
K1449-1
DUAL
REMOTE CONTROL
Includes a remote control box with a 16 ft. (5 m) length
control cable with 4-pin plug for the mating receptacle
on the bottom of the LN-10 control box. The remote con-
trol box contains a procedure selector switch and 2
rotating knob encoders, one controls arc voltage and the
other controls wire feed speed, which function the same
as comparable controls on the LN-10 front panel, when
the remote is connected and selected by the LN-10
Procedure Key.
K1450-"L"
- Extension cables are available in lengths
"L" of 12, 16 or 25 ft. (3.6, 4.9 or 7.6) to match the con-
trol to Feeder cable length used.
K683-1 DUAL PROCEDURE SWITCH
Requires K686-2 Adapter for LN-10. Kit includes gun
switch, and mountings for Lincoln Innershield and
Magnum guns, with 15 ft. (4.5 m) control cable and 3-
pin plug. K686-2 Adapter permits 3-pin plug and 5-pin
gun trigger plug to be connected to LN-10 5-pin
Trigger/Dual Procedure receptacle.
ACCESSORIES
K683-3 DUAL PROCEDURE SWITCH
Kit includes gun switch, and mountings for Lincoln
Innershield and Magnum guns, with 15 ft. (4.5m) con-
trol cable and 5-pin plug with two leads to connect to
gun trigger.
SPINDLE ADAPTERS:
K162H
Spindle for boom mounting Readi-Reels and 2" (51
mm) I.D. spools with 60 lb. (27.2 kg) capacity. User
mounted to appropriately prepared boom framework.
Includes an easily adjustable friction brake for control
of overrun.
Coil Adapter:
K1504-1
to be mounted on 2" (51 mm) O.D. spindles.
K435
mounted on 2" (51 mm) O.D. spindles.
K468
ed on 2" (51 mm) O.D. spindles.
Readi-Reel Adapters:
PROCEDURE
K363P
30 lb. (14 kg) and 22 lb. (10 kg) to a 2" (51 mm) spin-
dle. Durable molded plastic one piece construction.
Designed for easy loading; adapter remains on spin-
dle for quick changeover.
K438
50-60 lb. (22.7-27.2 kg) to a 2" (51 mm) spindle.
GUN ADAPTERS (FOR 10 SERIES
WIRE DRIVE)
installed K1500-2 gun connection kit. This kit is for
guns having a Tweco #2-#4 type connector. The LN-
10 has been designed to make connecting a variety of
guns easy and inexpensive with the K1500 series of
gun connection kits. Gun trigger and dual procedure
lead connections connect to the single 5 pin recepta-
cle on the front of the feed head box.
LN-10
(Not required for LN-10 Bench Models)
When a 2" (51 mm) spindle is used with Readi-Reels
or coils not on 12" (305 mm) O.D. spools, an adapter
is required:
Permits 50 lb to 60 lb (22.7-27.2 Kg.) Coils
Permits 14 lb. (6 kg) Innershield coils to be
Permits 8" (203 mm) O.D. spools to be mount-
Adapts Lincoln Readi-Reel coils of electrode
Adapts Lincoln Readi-Reel coils of electrode
The LN-10 wire feeder is equipped with a factory
C-2
Advertisement
Table of Contents
Troubleshooting
