Lincoln Electric AC-225C Specification Sheet page 167

169
FUME EXTRACTION GUNS
Magnum ® Pro 350XA
350 amp capacity at 100%
duty cycle (CO ). Delivers
2
superior fume extraction per-
formance in severe GMAW
and FCAW-GS applications.
Order K2649-1
Magnum ® Pro 550XA
Rated 550 amps at 100% duty
cycle (O shielding). Toughest
2
smoke gun in the business
for GMAW and FCAW-GS
applications.
Order K2650-1
Magnum ® 250XA
Lightweight and balanced
Fume Extraction Gun for
GMAW and FCAW-GS
welding .035"-045" wire.
250 amps at 60% duty cycle
(CO ) with a 45° Gooseneck.
2
Includes a 15 ft. cable.
Order K566-2
SUBMERGED ARC GUNS
Magnum ® Submerged Arc
Gun
Rated 600 amps, 15 ft.
(4.5 m) cable.
Order K113-1
for 5/64" (2.0 mm)
Order K113-2
for 3/32" (2.4 mm)
Mechanized SAW Gun
Rated 600 amps, for 5/64
and 3/32" (2.0 and 2.4 mm)
solid electrode. Includes
flux valve interlock switch
and receptacle for Hand
Travel Unit or Squirtmobile ® .
Order K114
www.lincolnelectric.com/mig-guns
Recommended General Options
Welding Guns, con't.
Fume Extraction & Submerged Arc Guns
Magnum ® 400XA
Lightweight and balanced
Fume Extraction Gun for
GMAW and FCAW-GS
welding .035"-1/16" wire.
400 amps at 60% duty cycle
(CO ) with 45° or a 60°
2
Gooseneck. Includes a 15 ft.
cable.
Order K556-2 for 45°
Order K556-14 for 60°
Magnum ® 250A Gun
For Innershield ®
Rated 250 amps at 60%
duty cycle. Use .068"-3/32"
(1.7-2.4 mm) diameter wires.
62° gun tube angle. Includes
15 ft. cable.
Order K309
Magnum ® 350A Gun
For Innershield ®
Rated 350 amps at 60%
duty cycle. Use .062"-3/32"
(1.6-2.4 mm) diameter wires.
62° gun tube angle. Includes
15 ft. cable.
Order K206
(See page 92, Environmental Section, for other Fume Extraction attachments and accessories)
SUBMERGED ARC
ACCESSORIES
Flux Cone
Fits K112 and K113 sub-
merged arc guns for welding
without the Continuous Flux
Feed Tank Assembly.
Order K119
Wire Reel and Flux Tank
Assembly
Includes flux tank, undercar-
riage, wire reel and brake
assembly in open shroud.
Order K305
or Lincore ® .
or Lincore ® .
Magnum ® 500A Gun
For Innershield ® or Lincore ® .
Rated 500 amps at 60%
duty cycle. Use 5/64"-.120"
(2.0-3.0 mm) diameter wires.
select either 45°or 82° gun
tube angle. Includes 15 ft.
cable.
Order K289-1 for 82° angle
Order K289-4 for 45° angle
FUME EXTRACTION
ACCESSORIES
Magnum ® Pro Spoiler ™
This innovative attachment
relieves hand fatigue by
allowing a looser grip on
the gun. Works with all
Magnum ® Pro models.
Order K2710-1
Flux Screen
For submerged arc welding.
Removes large particles from
reused flux. Includes air-driv-
en vibrator.
Order K310
Magnetic Flux Screen
Separator
For submerged arc welding.
Removes foreign magnetic
particles from reused flux.
Order K58
169