Paralleling; Connection Of Auxiliary Equipment To Wire Feeder Receptacle - Lincoln Electric IDEALARC CV-305 Operator's Manual

A-4

PARALLELING

The CV-305 is not designed to be paralleled with itself
or any other power source.
CONNECTION OF AUXILIARY EQUIPMENT
TO THE WIRE FEEDER RECEPTACLE
Occasionally, it may be necessary to make connection
to the circuits present in the 14-pin wire feeder recep-
tacle. These circuits, such as the auxiliary voltage,
contactor, and remote control circuits, may be
accessed with a K867 Universal Adapter. This
adapter plugs into the receptacle and provides the
user with short wire leads for connections. Refer to
the instructions provided with the K867, as well as the
wiring diagram for the CV-305 power source, for
details on making those connections. For your conve-
nience, wire feeder connection details are shown in
the DIAGRAM section.
NOTE: If you intend to use a standard Lincoln wire
feeder, order the appropriate input cable for
the specific feeder. It will make all of the con-
trol and power connections between the CV-
305 and the wire feeder WITHOUT the need
for a K867 Universal Adapter.
INSTALLATION
CV-305
A-4