Lincoln Electric CV 425 Operator's Manual
  1. Manuals
  2. Brands
  3. Lincoln Electric Manuals
  4. Welding System
  5. CV 425
  6. Operator's manual

Lincoln Electric CV 425 Operator's Manual

Hide thumbs Also See for CV 425:

Advertisement

Table of Contents

IM3033
09/2016
REV02
CV 425 & 510
OPERATOR'S MANUAL
ENGLISH
Lincoln Electric Bester Sp. z o.o.
ul. Jana III Sobieskiego 19A, 58-263 Bielawa, Poland
www.lincolnelectric.eu

Advertisement

Table of Contents
loading

Related Manuals for Lincoln Electric CV 425

Summary of Contents for Lincoln Electric CV 425

  • Page 1 IM3033 09/2016 REV02 CV 425 & 510 OPERATOR’S MANUAL ENGLISH Lincoln Electric Bester Sp. z o.o. ul. Jana III Sobieskiego 19A, 58-263 Bielawa, Poland www.lincolnelectric.eu...

  • Page 2: Declaration Of Conformity

    2014/35/EU, 2014/30/EU and has been designed in compliance with the following standards: EN 60974-1:2012, EN 60974-10:2014 20.04.2016 Piotr Spytek Operations Director Lincoln Electric Bester Sp. z o.o., ul. Jana III Sobieskiego 19A, 58-263 Bielawa, Poland 12/05 English English...

  • Page 3: Table Of Contents

    12/05 THANKS! For having chosen the QUALITY of the Lincoln Electric products.  Please Examine Package and Equipment for Damage. Claims for material damaged in shipment must be notified immediately to the dealer.  For future reference record in the table below your equipment identification information. Model Name, Code & Serial Number can be found on the machine rating plate.

  • Page 4: Safety

    Failure to follow the instructions in this manual could cause serious personal injury, loss of life, or damage to this equipment. Read and understand the following explanations of the warning symbols. Lincoln Electric is not responsible for damages caused by improper installation, improper care or abnormal operation.

  • Page 5: Installation And Operator Instructions

    WELDED MATERIALS CAN BURN: Welding generates a large amount of heat. Hot surfaces and materials in work area can cause serious burns. Use gloves and pliers when touching or moving materials in the work area. CYLINDER MAY EXPLODE IF DAMAGED: Use only compressed gas cylinders containing the correct shielding gas for the process used and properly operating regulators designed for the gas and pressure used.

  • Page 6: Output Connections

    (see "Accessories" chapter – Kit K14082-1). Output Connections Refer to points [4], [5], [6] and [8] of the Figures 2. CV 425 Controls and Operational Features CV 510 Figure 2. 1. Power Switch ON/OFF (I/O): Controls the input power to the machine.

  • Page 7: Machine And Circuit Protection

    WARNING For any repair operations, modifications or maintenances, it is recommended to contact the nearest Technical Service Center or Lincoln Electric. Repairs and modifications performed by unauthorized service or personnel will cause, that the manufacturer’s warranty will become null and void.

  • Page 8: Electromagnetic Compatibility (Emc)

    Lincoln Electric. Before installing the machine, the operator must check the work area for any devices that may malfunction because of electromagnetic disturbances.

  • Page 9: Technical Specifications

    Technical Specifications NAME INDEX CV 425 K14080-2A CV 510 K14081-2A INPUT Input Voltage U EMC Group / Class Frequency CV 425 220/380/400V±10% II / A 50 / 60 Hz 3 - phases CV 510 Input Power at Rated Cycle Input Amperes I cos φ...

  • Page 10: Weee

    12/05 Part list reading instructions  Do not use this part list for a machine if its code number is not listed. Contact the Lincoln Electric Service Department for any code number not listed.  Use the illustration of assembly page and the table below to determine where the part is located for your particular code machine.

This manual is also suitable for:

Cv 510

Table of Contents