Short-Sized Original Exit Jam; Transport Jam At Scanning Section - Toshiba e-STUDIO650 Service Handbook

[E76] Short-sized original exit jam
Are the registration roller, read roller, intermediate transport roller and small original reverse roller tainted?
YES
NO
Are the small original exit flapper and small original reverse flapper operating normally?
Adjust the small original exit solenoid.
[E77] Transport jam at scanning section
Are the registration sensor and read roller tainted?
Clean up the roller.
e-STUDIO550/650/810 TROUBLE SHOOTING
Clean up the rollers.
5 - 34 JUNE 2002 © TOSHIBA TEC