Zte MF60 Quick Start Manual page 8

Notes:
If you want to connect to the Internet by using Wi-Fi mode, make sure that the client supports the Wi-Fi
function.
The following picture is the application example. All of the client devices can surf on the Internet at the
same time.
Establish a connection between your device and the client
Via USB Cable
Connect your device and the client with the USB cable.
Power on your device.
Follow the system prompts to complete the software installation.
Notes:
•If the system does not launch installation automatically, you can run the installation program in path of
My Computer > Portable Hotspot.
•The driver of your device will be installed at the same time.
After the installation, the system will create a shortcut icon on your desktop and
for MF60 program group in the Start→Programs menu.
and the client will be established successfully a moment later.
Via Wi-Fi
1. Power on your device directly. It will take 1~2 minutes to initialize.
2. Use your normal Wi-Fi application on the client to search the available wireless network.
Notes: You need to check your Wireless Network Connection. Set the client to obtain an IP
address automatically in the Internet protocol (TCP/IP) properties, and the client will get an IP
address like "192.168.0.100".
3. Select the SSID of your device, and then click Connect.
6 Confidential and Proprietary Information of ZTE CORPORATION
ZTE MF60 Quick Guide
a ZTE USB Drivers
The connection between your device