Page 2
ZTE Corporation. The manual is published by ZTE Corporation. We reserve the right to make modifications on print errors or update specifications without prior notice.
The pictures, symbols and contents in this manual are just for your reference. They might not be completely identical with your modem. Please subject to the real object. ZTE operates a policy of continuous development and reserves the right to update and modify the technical specifications in this document at any time without prior notice.
Don’t use modem immediately after sudden temperature change. In such case, there will be dew inside and outside the modem, so don’t use it until it becomes dry. Take the modem carefully. Don’t drop, bend, knock or harshly treat it to avoid destructive damage.
2 Installation 2.1 Appearance 2.2 Software Installation Install the software before connecting your modem to your PC. Insert the CD into your CD-ROM drive. Download the installation software package, double click it, and then follow the steps to install. The following installation interface will show how to start installation.
Page 8
Click “Continue”. You will be guided through the steps necessary to install this software and click “Continue”. Select a destination volume to install software on the volume “Macintosh HD”, and then click “Continue”.
Page 9
Please enter user name and password to be authenticated, and left click “OK” to install. Installation is in progress, after a while, there will be a tip as follows: Left click “Restart” to restart computer and finish software installation. Note:If you have problems with installation after the upper operation, please contact the service provider for help.
program listed in. 2.3 Running Application Software After the modem connected normally, double click Finder →Applications→INDOSATM2 on the notebook to run the application software. 2.4 Pull out Modem Safely Please quit the application software at first, and then pull out the modem USB cable finally. 2.5 Software Uninstallation Close the application program before the software uninstalling.
3 Functions & Operation 3.1 Interface Introduction The diagrammatic drawing for the main interface of USB modem application software forms into three parts, related functions can be executed by operating in corresponding area. 1. Functional Button Area There will be various functional button icons shown in this area. Select different function button and it will carry out corresponding operation.
Page 12
To ensure the modem connect Internet properly, you’d better configure user’s network information at first. You can save different operator’s network configurations in different files. Press “+” or “-“ to create or delete a configuration file and edit in details.
Page 13
The user configuration information includes: Description (Config filename), Telephone Number, Account Name, Password, APN, DNS, and PDP address. If network support “Obtain server address automatically”, the connection manager can obtain the assigned IP information automatically. If network do not support it, you should fill the proper address manually. Please consult the network supplier of SIM/USIM card for all above information.
Page 14
information may differ with the network supplier and network types. And then click “Connect” to start connecting Internet. When connected, and it will show all the information of data flow, connected time and so During the course of connecting, you can “Cancel” the connecting. With connection in success, the button “Connect”...
3.3 Settings Click “Settings” icon to switch to the settings interface. It includes: security settings, network settings. The interface shows as the following picture:...
3.3.1 Security Settings Enable the PIN Code When “PIN Enable” item is selected, you will be asked to enter PIN code to use the modem. You can click “Revise PIN” to modify the number. Note: This function need network support.
3.3.2 Network Settings Automatic: The system selects the network automatically according to user’s configuration rules and network status. Manual: User selects network in manual way. Select network “Automatic”, the system will find the network available automatically. Select network “Manual”. After a while, network operator list appears in which red ones are unavailable.
4 FAQ & Answers When you meet the following problems in service, please refer to the following answers to solve it. If the problems still exist, please contact with your suppliers. Problem Description Possible Causes Problem Solving After restarted 1. The position of the USB 1.Adjust the angle and computer, there...
Page 19
Problem Description Possible Causes Problem Solving 3. The operating system is 3. Use the professional infected by virus (Such as Worm. anti-virus software to check Blaster which can take up a quantity and kill the virus in the of upload data flow and result that it operating system can’t receive download data flow so...