Getting To Know Your Device - Zte MF60 Quick Start Manual

Notes:
microSD is a trademark of SD Card Association.
The device's standby and working time are only for your reference, and based on ideal working
environment.

Getting to Know Your Device

The following figure shows the appearance of the device, it is only for your reference. The actual device
may be different.
Right Side
Interface and Buttons
1.Power
2.Memory card slot (microSD card)
3.WPS
4. LED Screen
5. External Antenna Connector
6.Charger/USB port
2 Confidential and Proprietary Information of ZTE CORPORATION
Front Left Side Bottom
Hold the Power button to switch on/off the
device.
It is where you insert the memory card (microSD
card).
This button is used to start/end Wi-Fi Protected
Setup authentication process and enable/disable
the Wi-Fi function.
Hold it for 3 seconds to activate the WPS
function.
When the WPS function is available, press it to
deactivate the WPS function.
Press it to enable/disable Wi-Fi function.
It indicates the signal type, signal strength, battery,
Wi-Fi, etc.
It is used to connect an external antenna to enhance
the signal strength.
Charge your device.
Connect the client to your device via USB
cable.
ZTE MF60 Quick Guide