Tspec Status And Statistics - Cisco WAP131 Administration Manual

Status and Statistics

TSPEC Status and Statistics

TSPEC Status and Statistics
Cisco WAP131 and WAP351 Administration Guide
• TS Identifier—TSPEC traffic session identifier. (range 0 to 7)
• Access Category—Traffic stream access category (voice or video).
• Direction—The traffic direction for this traffic stream. Direction can be one
of these options:
- uplink—From client to device.
- downlink—From device to client.
- bidirectional
• From Station—Shows the number of packets and bytes received from the
wireless client and the number of packets and bytes that were dropped
after being received.
- Packets—Number of packets in excess of an admitted TSPEC.
- Bytes—Number of bytes when no TSPEC has been established and
admission is required by the WAP device.
• To Station—Shows the number of packets and bytes transmitted from the
WAP device to the wireless client and the number of packets and bytes that
were dropped upon transmission.
- Packets—Number of packets in excess of an admitted TSPEC.
- Bytes—Number of bytes for which no TSPEC has been established
when admission is required by the WAP device.
You can click Refresh to refresh the screen and show the most current information.
The TSPEC Status and Statistics page shows the summary information about
TSPEC sessions by radio, the summary information about TSPEC sessions by VAP,
and the real-time transmit and receive statistics for the radio interface and the
network interfaces.
All transmit and receive statistics shown on the page are totals since the WAP
device was last started. If you reboot the WAP device, these figures indicate
transmit and receive totals since the reboot.
To view the TSPEC status and statistics, select Status and Statistics > TSPEC
Status and Statistics.
2
32