Uploading And Deleting Images - Cisco WAP131 Administration Manual

Captive Portal
Web Portal Customization
NOTE
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
Cisco WAP131 and WAP351 Administration Guide
Clicking Preview will show the text and the images that have already been saved
to the Startup Configuration. If you make a change, click Save before clicking
Preview to see your changes.

Uploading and Deleting Images

When users initiate the access to a VAP that is associated with a CP instance, an
authentication page appears. You can customize the authentication page with your
own logo or other images.
Up to 18 images can be uploaded (assuming six locales, with each locale having
three images). All images must be 5 kilobytes or smaller and must be in GIF or JPG
format.
Images are resized to fit the specified dimensions. For best results, your logo and
account images should be similar in proportion to the default images, as follows:
Image Type Use
Background Shows as the page background.
Logo Shows at top left of page to provide
branding information.
Account Shows above the login field to depict
an authenticated login.
To upload binary graphic files to the WAP device:
On the Web Portal Customization page, click Upload/Delete Custom Image next
to the Background Image Name, Logo Image Name, or Account Image fields.
The Web Portal Custom Image page appears.
Click Browse to choose the image.
Click Upload.
Click Back to return to the Web Portal Custom Image page.
Choose the Captive Portal Web Locale that you want to configure.
For the Background Image Name, Logo Image Name, or Account Image fields,
choose the newly uploaded image.
10
Default Width by
Height
10 by 800 pixels
168 by 78 pixels
295 by 55 pixels
167