Table of Contents
Advertisement
Samsung iDCS100
SYSTEM ADMINISTRATOR
Before any customer programs can be accessed, you must first open programming us-
ing the customer-level passcode you have been assigned. This, and all subsequent
programming, must be done using a display keyset.
Note: Should it become necessary to change the customer-level passcode, see MMC 201.
PROGRAM KEYS
The following keys are used for programming.
VOLUME UP (+ or
VOLUME DOWN (– or
KEYPAD (0–9,
and #)
SOFT KEYS
SPEAKER
TRANSFER (TRSF)
HOLD
OPEN CUSTOMER-LEVEL PROGRAMMING
[MMC 200]
Opens customer-level programming mode to provide access to system administrator
programming.
ACTION
1.
Press Transfer (or TRSF) and dial 200
2.
Dial the 4-digit passcode.
(The passcode is not displayed)
3.
Dial 1 to select 'ENABLE'
OR
Press VOLUME up or down key to select
4.
Press the SPEAKER key.
5.
Dial the 3-digit program (MMC) code you want to
access (e.g. 201)
OR
Scroll through MMC codes using the VOLUME keys
and press the SPEAKER key to select.
Follow the instructions for your selected program. Some programs are described in this
section. For other programs, refer to the Samsung Combined Programming Manual.
10
PROGRAMMING
Scroll forward through options.
)
)
Scroll backward through options.
Enter selections in display.
Move cursor left and right.
Store data and advance to next program.
Store data and exit
Clear entry in display
System Administration Guide
DISPLAY
ENABLE CUS. PROG.
PASSCODE: _
ENABLE CUS. PROG.
DISABLE
ENABLE CUS. PROG.
ENABLE
201: CUS. PASSCODE
SELECT PROG ID
Advertisement
Table of Contents
