Table of Contents
Advertisement
Samsung iDCS100
PROGRAM AUTHORISATION CODES
[MMC 707]
You can add or change authorisation code entries. These codes are used to authorise
calls made by stations and can be forced or optional. Each code is associated with a
class of service which is activated when the code is entered. Up to 250 4-digit codes
are allowed.
Note: To set up stations to use forced authorisation codes, see
Account and Authorisation
Open customer programming and follow these instructions.
ACTION
1. Press Transfer (or TRSF) 707
Display shows
2. Dial the code index entry (e.g., 005)
OR
Press the VOLUME keys to select the entry number
and press the right soft key to move the cursor
3. Enter the authorisation code via the keypad (e.g. 1234)
and press the right soft key to move the cursor
4. Enter class of service no. 01–30 (e.g. 05)
OR
Press the VOLUME keys to select the COS number
5. Press the right soft key to return to step 2
OR
Press Transfer (or TRSF) to store and exit programming
OR
Press SPEAKER to store and advance to the next program
Codes.
System Administration Guide
Program Stations for Forced
DISPLAY
AUTHOR CODE (001)
C:01
AUTHOR CODE (005)
_
C:01
AUTHOR CODE (005)
1234
C:01
AUTHOR CODE (005)
1234
C:05
29
Advertisement
Table of Contents
