System Administrator Programming; Open Customer-Level Programming - Samsung OfficeServ 100 System Administration Manual

Samsung OfficeServ 100
SYSTEM ADMINISTRATOR
Before any customer programs can be accessed, you must first open programming using the cus-
tomer-level passcode you have been assigned. This, and all subsequent programming, must be
done using a display keyset.
Note: Should it become necessary to change the customer-level passcode, see MMC 201.
PROGRAM KEYS
Your keyset keys/buttons are used to perform the following functions during programming.
VOLUME (UP & DOWN)
KEYPAD
SOFT KEYS
SPEAKER
TRANSFER
HOLD
To select the ALL option (all stations/trunks, etc. rather than selected stations/trunks, etc) when it is
available during programming, use the following key:
ANS/RLS
or
REDIAL
or
CONFERENCE

OPEN CUSTOMER-LEVEL PROGRAMMING

[MMC 200]
Opens customer-level programming mode to provide access to system administrator programming.
ACTION
1. Press Transfer (or TRSF) and dial 200
2. Dial the 4-digit passcode.
(The passcode is not displayed)
3. Dial 1 to select 'ENABLE'
OR
Press VOLUME up or down key to select
10
PROGRAMMING
Scroll through options.
Enter your selections (numbers, text).
Move cursor left and right.
Store entered data and advance to next program (in number se-
quence).
Store entered data and exit programming.
Clear previous entry.
(DCS Euro and iDCS series)
(2-Line LCD 5000 series)
(Large LCD 5000 series)
System Administration Guide
DISPLAY
ENABLE CUS. PROG.
PASSCODE: _
ENABLE CUS. PROG.
DISABLE
ENABLE CUS. PROG.
ENABLE