Program Station Names - Samsung iDCS100 System Administration Manual

Digital communication system
Hide thumbs Also See for iDCS100:
Table of Contents

Advertisement

Samsung iDCS100

PROGRAM STATION NAMES

[MMC 104]
This program is used to set or replace a name or identification for each extension, up to
11 characters long.
Open customer programming and follow these instructions.
ACTION
1. Press Transfer (or TRSF) 104
Display shows
2. Dial station number (e.g., 205)
OR press the VOLUME keys to select the
station and press the right soft key to move
the cursor
3. Enter the station name using the procedure
described below and press the right soft
key to return to step 2
4. Press Transfer (or TRSF) to store and exit
programming OR press SPEAKER
to store and advance to the next program
PROCEDURE FOR ENTERING NAMES AND OTHER TEXT
Names and other text are written using the number keys. Pressing a key selects the
character shown on the key. Pressing a different key moves the cursor to the right be-
fore selecting the next character for that key.* For example, to enter the name "SAM
SMITH" the first letter "S" is selected by pressing the key number 7 four times (i.e. the
first key press selects "P", the second selects "Q", and so on). Now press the number 2
once. This moves the cursor and selects the letter "A." Continue selecting characters
from the keypad to complete your message.
By default, characters are displayed in upper case. To display lower case characters,
before you begin typing press the "A" key. (Refer to the diagrams shown in
System Speed Dial
Numbers.) Press the "A" key, as required, to toggle between upper
and lower case. You can have a combination of upper and lower case characters within
a name.
*Tip: When the character you want next appears on the same key as the character you have
just entered (e.g. you typed "P" and now want to type "R"), press the VOLUME
move the cursor to the right, then select the next character.
The # key is used to select the following special characters (in sequence of number of key
presses): # space & ! : ? . , % $ - < > / = [ ] @ ^ ( ) _ + { } | ; " → `
14
System Administration Guide
DISPLAY
[201]
S T N N A M E
[205]
S T N N A M E
_
[205]
S T N N A M E
SAM SMITH
Program
+
or
key to

Advertisement

Table of Contents
loading

Table of Contents