Alternator - To Remove And To Fit - Perkins 700 Series User Handbook Manual

Section 23
Electrical Equipment
Operation:

Alternator - to remove and to fit

Recommended torque:
Engine type Nm
Setscrew 12
Nut 24
Nut, alternator
pully 60
Service operations:
1. Remove drive belt ... ... ... ... ... 23.01
1
05/99
Printed in England
© Propriety information of Perkins Engines Company Limited, all rights reserved
Special notes
lbf ft kgf m
Caution: Do not loosen the setscrew (1) as the thermostat housing to cylinder
9 1,2
head seal could be broken and result in a leakage of coolant.
18 2,4
Note: Ensure that any washers and distance pieces are fitted in their
correct positions and that the alternator pulley is aligned to the crankshaft
44 6,1
pulley within +/- 2,4 mm (3/32 in).
700 Series
23.02
145