To Record The Maximum Fuel Position Of The Fuel Control Rack - Perkins 700 Series User Handbook Manual

Section 20
Fuel System
Operation:

To record the maximum fuel position of the fuel control rack

Recommended torque:
Engine type Nm
Service Operation:
1.Electrical stop solenoid
to remove and fit ... ... ... ... ... 23.06
1
2
3
05/99
Printed in England
© Propriety information of Perkins Engines Company Limited, all rights reserved
Special notes and tools:
lbf ft kgf m Special tools: Rack position tool, part number 27610089
Clamp tool, part number 271610018
Caution: Ensure that the components behind the ©D© plug are not damaged
when removing.
1. Remove the 'D' plug from the timing case.
2. Remove the access plate from the cylinder block.
3. Put the clamp into the timing case such that
the end of the clamp points downwards.
700 Series
20.16
127