Section 13
Connecting Rod Assembly
Operation:
Piston and piston ring - to inspect
Recommended torque:
Engine type
Nm
-
Service operations:
1. Remove piston rings ... ... ... ... 13.03
Fit new piston rings in the grooves in the piston and check for wear of the grooves with feeler gauges. Compare the piston ring
clearance in the groove to that given for new components in Data and dimensions. Renew the piston, if the grooves are worn too
much.
05/99
Printed in England
© Propriety information of Perkins Engines Company Limited, all rights reserved
Special tools:
lbf ft
kgf m
Feeler gauge.
700 Series
13.04
Continued
55