3D Settings - Panasonic TX-50AX802B Ehelp

2D→3D:
Converts 2D images into 3D.
Please note the 3D images appear slightly different from the
●
originals.
Using this function for profit-making purposes, or publically showing
●
images converted from 2D to 3D in places such as shops or hotels,
etc. may infringe on the rights of the copyright holder protected
under copyright law.

3D Settings

1. Display the menu with MENU.
2. Select Picture > 3D Settings
3. Select one of the following items with
3D Detection / 3D Signal Message
3D Adjustment / L/R Picture Swap
4. Set with / and press
To exit the menu screen
●
EXIT
3D Detection
(On (Advance) / On
Selects whether to switch to the 3D mode automatically or not.
On (Advance):
Detects all the 3D format signals and displays the 3D image
automatically.
On:
Detects the particular 3D format signals (Frame Sequential, etc.) and
displays the 3D image automatically.
To view 3D images without any notifications and operations, set to
●
(Advance).
3D Signal Message
(On / Off)
Selects whether to give a notification message when a signal of 3D format is
found or not.
Not valid when 3D Detection
●
For DVB, Component, HDMI and DisplayPort input
●
with /
/ 3D Refresh Rate
/ Edge Smoother
OK to store.
/ Off)
is set to
- 94 -
and press OK to access.
/ and press OK
/ 2D→3D Depth
/ Safety Precautions
On (Advance)
to access.
/
On