No image can be displayed
Check the correct input mode is selected.
●
Check the setting of
●
match the output of the external equipment.
Watching > External equipment
Is Contrast,
Brightness
●
Watching > For best picture > Basic settings
Check all required cables and connections are firmly in place.
●
Blurry or distorted image (no sound or low volume)
Reset channels.
●
Watching > Tuning and editing channels > Auto Setup
There may be red, blue, green and black spots on the screen
This is a characteristic of liquid crystal panels and is not a problem. The
●
liquid crystal panel is built with very high precision technology giving you
fine picture details. Occasionally, a few non-active pixels may appear on
the screen as a fixed point of red, green, blue or black. Please note this
does not affect the performance of the panel.
AV2 (COMPONENT
or
Colour
in the Picture Menu set to the minimum?
- 256 -
/ VIDEO) in
Input Selection
to