Aspect Control Signal - Panasonic TX-50AX802B Ehelp

H Full:
Displays the image enlarged horizontally to fit the screen without
distortion.
For DCI 4K format
●
V Full:
Displays the image enlarged vertically to fit the screen without distortion.
For DCI 4K format
●
= Note =
Display the image (TV, external input, etc.) full-screen to use this function
●
completely.
Aspect mode can be memorised separately for SD (Standard definition)
●
and HD (High definition) signals.
Aspect cannot be changed in teletext service and 3D format signals.
●
Aspect is fixed to
●
4K.
Only 16:9 and 4:3
●

Aspect Control Signal

Programmes usually contain an "Aspect Control Signal". (Widescreen signal,
Control signal through SCART / HDMI terminal)
In Auto mode, aspect mode will appear in the top left of the screen if a
Widescreen signal (WSS) or a Control signal through SCART (pin8) / HDMI
terminal is found. The aspect will switch to the appropriate ratio.
Watching > For best picture > Aspect
■
Available conditions
●
Terrestrial terminal (WSS only)
Valid input signal format:
DVB
PAL I
Invalid input signal format:
PAL 525/60 6.0 MHz
M.NTSC 6.0 MHz
16:9 when watching the content of 4K format except DCI
are available for PC signal from DisplayPort input.
- 54 -