Table of Contents
Advertisement
3D Settings
1. Display the menu with MENU.
2. Select
Picture
>
3. Select one of the following items with
3D Detection
/
3D Signal Message
3D Adjustment
/
4. Set with
/
and press
To exit the menu screen
●
EXIT
3D Detection
(On (Advance)
/
On
Selects whether to switch to the 3D mode automatically or not.
On
(Advance):
Detects all the 3D format signals and displays the 3D image
automatically.
On:
Detects the particular 3D format signals (Frame Sequential, etc.) and
displays the 3D image automatically.
To view 3D images without any notifications and operations, set to
●
(Advance).
3D Signal Message
(On
/ Off)
Selects whether to give a notification message when a signal of 3D format is
found or not.
Not valid when
3D Detection
●
For DVB, Component and HDMI input
●
3D Refresh Rate
(Auto
/
100Hz
/ 120Hz)
Reduces juddering and flicker noises of the 3D images when using the 3D
Eyewear.
100Hz:
If light appears to flicker under fluorescents (or dimmers) of 50 Hz.
3D Settings
with
/
L/R Picture Swap
/
Edge Smoother
OK
to store.
/ Off)
is set to
- 72 -
/
and press
OK
to access.
/
and press
OK
3D Refresh Rate
/
2D→3D Depth
/
Safety Precautions
On (Advance)
to access.
/
On
Advertisement
Table of Contents
