Panasonic TX-50AX802B Ehelp page 104

■
Other Sat. / Satellite
To use dual tuner function, set
●
1. Select Auto Setup
2. Select the satellite with
Select IN 1 / IN 2
●
Selectable satellites are Astra2/Eurobird,
●
Check the dish alignment for the satellite to select.
●
– The Freesat channel uses Astra2 at 28.2° East and Eurobird1
at 28.5° East satellites. To ensure your satellite dish is correctly
installed, consult your Freesat registered dealer. (UK only)
– For Astra1
broadcasting companies.
If you want to tune from all available satellites, select
●
3. Select Start with
4. The signal condition is displayed and press
If you select Any
●
It takes a while to check the connection for your selected satellite.
●
Ensure that the
●
locked, the search cannot be executed.
If the status is shown as
●
Strength have no indications, please check the dish alignment. If the
status is shown as
Quality / Signal Strength
again.
5. The confirmation screen is displayed and press
6. Select the search mode with
(Settings are made automatically.)
If you select Astra2/Eurobird
●
be searched.
When the operation is completed, the channel at the lowest position will
●
be displayed.
Dual Tuner Mode
with / and press
/ .
in Signal Input with
and Hotbird, please consult the received satellite
/ and press OK
Satellite, this step is skipped.
Signal Lock status is shown as Locked. If it is not
Not locked
Not locked but there are some levels of
indicated, select
/ and press
or Any
- 104 -
to On.
OK to access.
/ to set for each tuner.
Astra1 and Hotbird.
Any
to access.
OK to access.
and Signal Quality /
Any Satellite in step 2 and try
OK to access.
OK to start Auto
Satellite, Freesat channels will also
Satellite.
Signal
Signal
Setup.