Panasonic TX-50AX802B Ehelp page 95

3D Refresh Rate
(Auto / 100Hz / 120Hz)
Reduces juddering and flicker noises of the 3D images when using the 3D
Eyewear.
100Hz:
If light appears to flicker under fluorescents (or dimmers) of 50 Hz.
120Hz:
If light appears to flicker under fluorescents (or dimmers) of 60 Hz.
2D→3D Depth
(Max / Mid / Min)
Selects a level of 3D-image depth for viewing converted 2D images.
3D Adjustment
(On / Off)
Adjustment of the 3D effect (except in
Set to On to enable
When setting to On, a safety precaution message will appear. Read it
●
carefully and press
When adjusting, take into account that the vision of 3D images varies
●
among different individuals.
Effect:
Adjusts the 3D depth according to the contents or to your preference.
(This setting will not be memorised when changing the input mode or
channel.)
L/R Picture Swap
(L/R (Normal) / R/L (Reversed))
Swaps pictures for left eye and right eye (except in
Select R/L (Reversed)
This setting will not be memorised when changing the input mode or
●
channel.
2D→3D
Effect setting.
BACK/RETURN to go to
if you feel that the sense of depth is unusual.
- 95 -
mode)
Effect setting.
2D→3D mode).