3D Settings - Panasonic TC-60AS800U Ehelp

3D settings

MENU Menu
Auto detect 3D
(Auto 1/Auto 2/Off)
Auto 1:
Switches to 3D display when 3D indication is available (HDMI (3D),
AVCHD file, etc.)
Auto 2:
Same as Auto 1. Also detects 3D signal by identifying similar image in
side-by-side or top-and-bottom 3D formats.
Note:
Choose 3D mode manually when auto detection is not available.
●
3D signal notification
(On/Off)
On:
Displays a message according to the signal received by the
detect 3D.
2D→3D depth
(High/Mid/Low)
Adjusts the simulated 3D depth perception effect of the 2D incoming signal.
3D adjustment
(On/Off)
Adjust the left eye versus right eye depth effect of the image. Set to On to
adjust Effect (-3 to +3).
Gray-out in 2D mode
●
Left/Right swap
(Normal/Swapped)
Flips the phase of the image to give the correct perception of depth.
Gray-out in 2D mode
●
> Picture > 3D settings
- 137 -
Auto