Controls And Features; Run-In Attachment Belt - Ariens Sno-Thro 932105 - 8526 , 932506 - 8526 Owner's/Operator's Manual

Run-in Attachment Belt

1. Start unit in a well-ventilated area
according to Starting and Shut-Off in
Operation.
2. Engage attachment clutch lever and run
attachment for about 15 minutes.
z
2
1
25
24
23
22
21
20
19
18
17
16
15
OS6785
OS6740
Figure 8
OS6820

CONTROLS AND FEATURES

3 4
11
13
14
3. Stop unit, wait for all moving parts to stop,
and remove spark plug wire.
4. Adjust belt finger, if necessasry. See
Attachment Drive Belt Replacement on
page 22.
5. Adjust clutch according to Attachment
Clutch/Brake Adjustment in Service and
Adjustments.
1. Headlight
2. Electric Starter (932105)
3. Oil Fill and Dipstick
4. Discharge Chute Deflector
5. Discharge Chute
5 6. Impeller
7. Auger
6
8. Scraper Blade
9. Recoil Starter Handle
10. Primer Bulb
11. Oil Drain Plug
12. Attachment Clutch Lever
13. Deflector Remote Control
14. Speed Selector
7
15. Chute Crank
16. Traction Drive Clutch Lever
17. Ignition Switch, push-pull
8
18. Choke
19. Throttle (Engine Stop)
9
20. Runner(s)
21. Axle Lock Pin
10
22. Belt Cover
23. Fuel Shut-off Valve
24. Spark Plug and Wire
25. Gas Tank and Cap
12
GB - 12