Lighting Instructions - Napoleon PTH31GT Manual

Bellagio commercial gas patio torch
Hide thumbs Also See for PTH31GT:
Table of Contents

Advertisement

Available languages

Available languages

Lighting Instructions

WARNING!
Never use the torch while it is raining, the glass tube could crack or break causing
serious injury.
WARNING!
Ensure burner controls are in the off position. Slowly turn on the gas supply valve.
1. Turn burner control to 'LIGHT'
position.
2. Press and hold igniter button until
pilot lights, or light by match.
(check for pilot flame through glass
tube)
3. Once pilot is lit, keep control knob
depressed for 15 seconds and then
turn control knob to 'LOW'.
4. If ignition is not immediate, turn
burner control off. Wait 5 minutes.
Repeat.
5. For maximum heat turn control
knob to 'HIGH'
6. To turn off the patio torch, turn the
control knob to the 'OFF'
position and then turn the gas supply
off at the source.
WARNING!
The propane cylinder is equipped with an excess flow device. Unless burners are
turned off, prior to turning the cylinder on, only small flames and low heat will be achievable.
WARNING!
If lighting the unit with a match, clip the match into the supplied lighting
rod. Hold the lit match through the hole in the bottom or front of the control box while
turning the burner valve to high.
Lighting Holes
7
EN
www.napoleongrills.com

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents