To cancel the hit, turn the Scroll Control.
To temporarily lock out a frequency, press l/O.
To permanently lock out a frequency, press l/O twice quickly.
To store a frequency, press Pgm/E. See Storing Found Search
Frequencies on page 51.
To exit Close Call Only mode, press Scan.
The following paragraphs describe Delay, CTCSS/DCS, Pager
Screen, Alert Settings, Setting Close Call Bands, and reviewing/
unlocking frequencies.
Set Close Call Bands
This setting allows you to select the bands searched for all
Close Call modes.
Press Func then Hold to view the Close Call menu.
1.
Scroll to Close Call Bands and press Pgm/E.
2.
3.
Scroll to each band you want to enable/disable and press
Pgm/E.
Scroll to select C-Call Band On or Off and press Pgm/E.
4.
• 25-88 - VHF Low Band (25 - 88 MHz)
• 108-137 - Civil Air Band (108 - 137 MHz)
• 137-174 - VHF High Band (137 - 174 MHz)
• 225-320 - Military Air Band (225 - 320 MHz)
• 320-520 - UHF Band (320 - 520 MHz)
• 806-960 - 800MHz Band(806-960MHz)
• Back - returns to previous menu.
57